Murrays Sports H-18 RIGGING KIT - Shop

You might also like

H-18/21 Sport Cruiser Jib Halyard with Shackle

Murrays Part# 002-0486-00

Jib halyard with shackle for H18/21 Sport Cruiser is constructed to factory specifications.

Please note that the H21SC is differentiated by its 8.5' beam, front trampoline and Hobie® 18 rigging.

Order Jib Halyard line separately:

20' of 1/8" line Murrays Part# 39-0221

Murrays Sports

H-18/21SC JIB HALYARD WITH SHACKLE

Hobie Getaway Bridle 5/32" Black Wire

Murrays Part# 002-0915-22

One black bridle for Hobie® Getaway is constructed to factory specifications. We recommend ordering two to ensure equal lengths.

Compare to Hobie Part# 37822011

Murrays Sports

GETAWAY BRIDLE 5/32" BLACK WIRE

Murrays Sports

H-18/20 JIB HALYARD WITH CLIP

Spare Parts Kit: H18

Murrays Part# 001-4221

Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit for Hobie® 18 contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Compare to Hobie Cat® #30307.

Murrays Sports

H-18 SPARE PARTS KIT:

(1)

Hobie 18 forestay - Hobie part number 60810021 white or 60812021 black

Murrays Sports

H-18/21SC FORESTAY 5/32" WIRE

(1)

Boom Outhaul Bearing H18
Murrays Part# 50-60240000
Boom bearing for Hobie 18 outhaul system

Murrays Sports

H-18 BOOM OUTHAUL BEARING

H17/18/20/21/Wave and Getaway
Rudder Cam Kit

Murrays Part# 001-3550

The Rudder Cam Kit: H17, H18, H20, H21, Wave, & Getaway are replacement rudder cams which help keep your Hobie’s rudder lock-down mechanism functioning properly. This kit includes sister screws to install the cams, making it easier to replace the cams. Purchase the complete kit if your boat has the stock flare pins; or you can purchase just the cams (#50-10480000 each) if your boat already has sister screws.

Murrays Sports

H-17/18/20/21/WAVE AND GETAWAY RUDDER CAM KIT

Rudder Pins H17/18 Stainless Steel

Murrays Part# 001-4273

Weight-saving compared to solid stainless steel pins, hollow stainless rudder pins with still beefy .065″ wall provide reduced wear and the good long-term durability. The universal stainless steel 3/8″ x 9-1/4″ rudder pins are suited for; Hobie 17/18/20 rudder castings. Also used on older Hobie Wave and Getaways with metal rudder castings.

Cotter pins are included.
Alternative to Hobie Cat® #60880011.  (* Pre EZ LOC Rudder c

Murrays Sports

H-17/18 RUDDER PINS PR (SS)

(1)

HOBIE 18 MAIN SAIL - WHITE

White Hobie 18 main sail from Hobie.  Discontinued product, limited availability.

Hobie part number 60991011

Murrays Sports

H-18 MAINSAIL (WHITE)

5"X12" Zip Pouch-Assorted Colors

Murrays Part# 31-1401

The Murrays Zip Pouch 5"X12" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A.

Compare to Hobie Cat® stow bag #72000B and 72005B

Murrays Sports

5"X12" ZIP POUCH-ASSORTED COLORS

Murrays Hobie 18SX line package contains all the lines on a Hobie 18SX. The pack utilizes Robline Neptune 500 for the main and jib sheets and Pelican VLS, Very Low Stretch, for the control lines.  The Hobie 18 SX has wings that extend fore and aft of the front and rear crossbars and a taller mast, 29'7".

Main Sheet

Jib Sheet

Daggerboard Handles

Outhaul

Downhaul

Mast Rotation

Main Halyard

Trampoline Lacing Lines

Trapeze Adjustment Line

Batten Ties

Roller Furline line

Jib Halyard

Jib L

Murrays Sports

H-18SX LINE PACKAGE

HOBIE GETAWAY RIGGING KIT

Complete standing rigging package for the Hobie Getaway.  If you need the swivel above the forestay as well it is linked below with the shackle that attaches it.

Kit includes:

Main Halyard

Forestay

2 x Shrouds (Side Stays)

2 x Bridles

Hobie part numbers 37651001, 37790001, 37810021, 37822011

Murrays Sports

GETAWAY RIGGING KIT

Murrays Part# 001-7050
The gold standard for catamaran racing has been the Coffee Marine Bridle Fly or the Hobie STD bridle vane that was designed based on it. The red plastic vane is very sensitive to wind shifts and easily mounts to the front of a Hobie 16, 14, Wave and all the Prindle Catamarans. With an adapter it can be mounted to any of the Hobiecat sailboats that use a furling drum. To start out, we are offering the standard length which extends about 13" and
Hobie part number 7703

Murrays Sports

COFFEE MARINE BRIDLE VANE

(1)

Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.

Murrays Sports

TELO-CAT REPLACEMENT VANE - DISCONTINUED

Hobie factory replacement retainer clip for Hobie 20-style tiller connector and adjuster kit (#07-1953). TILLER CONNECTION RETAINER CLIP - HOBIE 20. 40590000 MURRAYS.COM - IN STOCK

Murrays Sports

H-20 TILLER CONNECTOR RETAINER CLIP

Murrays Sports

H-18 LINE PACKAGE

Hobie Wave Bow Spreader Tang

Murrays Part# 50-38120041

Replacement tang for Hobie Wave bow spreader.
Hobie Part# 38120041

Murrays Sports

WAVE BOW SPEADER TANG

Murrays Part# 001-4045
Hobie 18 Mast Bearing Kit enables smooth mast rotation on the Hobie® 18. The kit includes a new mast bearing, stainless steel washers and Teflon washer.

To mount, use one #19-3019 screw (included) for post-1990 Hobie 18 or one #19-3020 screw (sold separately) for pre-1990 Hobie 18.

Compare to Hobie Cat® #1132 (bearing 60110000 and Teflon™ washer).

Murrays Sports

HOBIE 18 MAST BEARING KIT

Murrays Sports

H-18/21SC UPPER FORESTAY 5/32" WIRE

H18 Diamond Wire Complete

Murrays Part# 50-61750001

Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.

Murrays Sports

H-18 DIAMOND WIRE COMPLETE

Hobie 18 Mast Base Hinge casting
60650011

Murrays Sports

H-18 MAST BASE HINGE

Hobie Aussie Halyard Ring

Murrays Part# 007-3064

If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Murrays Aussie Ring (#01-4216).

Hobie® Part# 3064

Murrays Sports

HOBIE AUSSIE HALYARD RING

F4 Foils

4.9

(29)

Hobie Wave rigging kit, 2 shrouds, 2 bridles and a forestay

Murrays Sports

H WAVE RIGGING KIT

Wind Vane Replacement Tips and Washers 

Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly!

Murrays Sports

WIND VANE REPLACEMENT TIPS & WASHERS

Hobie 6 BRIDLE WIRE
The H-16 Bridle Wire is one bridle for Hobie 16 constructed of 316 stainless steel wire to factory specifications. We recommend purchasing two bridles in order to ensure equal length and strength of your bridle wires. Wire lengths changed over the years, please select the appropriate bridle wires for your boat. We recommend Black coated for the longest lifespan.

Murrays Sports

H-16 BRIDLE WIRE

(1)

Hobie EZ Loc Rudder Linkage

Murrays Part# 50-50313201

Replacement rudder linkage for Hobie EZ Loc style rudder assemblies.

 Hobie Bravo, Getaway and Wave

Hobie Part# 50313201

Murrays Sports

HOBIE EZ LOC RUDDER LINKAGE

H16 Jib Halyard with Shackle

Murrays Part# 002-0284-00

Jib halyard with shackle for Hobie 16 is constructed to factory specifications.

This is for use on the classic style H16 jib halyard system with a metal sheave up near the mast tang that was standard in the 70s and 80s.

The rope section of the jib halyard is 20' of 3/16ths line.

Compare to Hobie Part# 20661001

Murrays Sports

H-16 JIB HALYARD WITH SHACKLE

Hobie Sail Feeder Kit

Murrays Part# 50-80100501

Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.

Murrays Sports

HOBIE SAIL FEEDER KIT

Aussie Jib Halyard Pigtail

Murrays PN 002-0284-00R

Jib halyard pigtail for the Aussie system on a Hobie 16.  Constructed with 1/8" 7x19 bare wire.

Compare to Hobie part number 20810041.

This model is built to the 2009 factory spec.

Often paired with a 28-0186 Harken Fiddle Block.

Murrays Sports

H-16 AUSSIE JIB HALYARD PIGTAIL

saltcitysailing

5

(16)

Rudder Cam Screws H17, H18, H20,
Older Wave and Getaway
Murrays Part# 001-3551
The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable.
Compare to Hobie Cat® #5203 and #50312301.
Sold in pairs

Murrays Sports

H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS

H18/21 Jib Protector Balls
Murrays Part# 012-0020
Diamond wire spreader balls for the Hobie 18 and 21.  They go on your diamond wire spreaders to protect your jib from rubbing against them.

Murrays Sports

H-18/21 JIB PROTECTOR BALLS

SUPER GOOSE H-17/18/20/21
This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing.

The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model.

Hobie part number 1510

Murrays Sports

H-17/18/20/21 SUPER GOOSE

Hobie 18 Bridle wire - Hobie part number #60820001 white or #60822001 black.

Murrays Sports

H-18 BRIDLE 5/32" BLACK WIRE

WING MOUNT KIT (1 EACH)

Murrays PN 50-65071001

Hardware mounting kit for Hobie 18 Magnum and SX wings. 

Includes:

2 x Wing Slug - Threaded post

2 x 5/16 -18 threaded nylock nuts
2 x 5/16 -18 Socket Screw

Murrays Sports

WING MOUNT KIT (1 EACH)

H14/16/18 Gooseneck Boom Pin

Murrays Part# 50-10772010

Hobie® factory gooseneck boom pin for Hobie® 14, 16 or 18.

Murrays Sports

H-14/16/18 GOOSENECK BOOM PIN

H21SE Forestay 5/32" Wire

Murrays Part# 002-0545-32

Forestay for Hobie® 21SE (Special Edition) is constructed to factory specifications.

The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.

Murrays Sports

H-21SE FORESTAY 5/32" BLACK WIRE

H18 Mast Bearing

Murrays Part# 50-60110000

Hobie Cat® factory mast bearing for Hobie 18. This part sits on the mast step to facilitate mast rotation on the Hobie 18.

Hobie part# 60110000

Murrays Sports

H-18 MAST BEARING

Murrays red, green and blue tell tails. Sail trimming guides.

Murrays Sports

MURRAYS TELL TAIL SET

Murrays Sports

RONSTAN JIB TRACK END CAP

Mast Ball H20/21/Getaway

Hobie part number 30110001

Hobie factory replacement mast ball for Hobie 20, Hobie 21 and Hobie Getaway. Ball measures 1-1/2" diameter with a 5/8" hole.

Murrays Sports

H-20/21/GETAWAY MAST BALL

(1)

McLube Sailkote Dry Lubricant

Murrays Part# 40-0408

McLube Sailkote is the easy-to-apply, high performance dry lubricant that makes sails, hulls, rigging and anything that moves on your boat work more efficiently and last longer. Formulated with Dupont Krytox®, an environmentally-friendly, translucent liquid lubricant, it dries quickly to a hard, ultra-slick, hydrophobic dry coating.

Murrays Sports

MCLUBE SAILKOTE DRY LUBRICANT

Hobie Shroud Anchor Bar

Murrays Part# 50-50101701

This is the bar that the shroud anchor pins screws into to secure the shrouds on. Shroud anchor bar for Hobie Cat masts (replaces the nut used on older models). Use with the anchor pin to secure under the lip of the hull.

Stainless steel
Length: 3.5 inches
Application: Hobie 14/16/17/18 sailboats

Compare to Hobie Part# 50101701

Murrays Sports

HOBIE SHROUD ANCHOR BAR

H21 Special Edition Bridle 5/32" Wire

Murrays Part# 002-0515-22

One bridle for Hobie® 21SE (Special Edition) is constructed of 5/32" wire to factory specifications.

The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front trampoline.

Use this page to order product numbers:

002-0515-21 White
002-0515-22 Black

Murrays Sports

H-21SE BRIDLE 5/32" BLACK WIRE

The Hobie 18 Trapeze Shock Cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. On this kit for Hobie® 18, one hook connects to either the thimble on the trapeze wire or the adjustment line, then runs through the hull fairlead and through the eyestrap under the lip of the hull near the bow or stern for crew and skipper trapeze lines respectively. The 3/16" shock cord stretches more and slides through ferrules better than larger diameter shock cord. Includes four

Murrays Sports

H-18 TRAP SHOCK CORD (4)

(1)

Murrays Sports

HOBIE TILLER CROSSBAR ADJUSTABLE END CAP - 60400011

H18 Dimond Wire without Turnbuckle

Murrays Part# 002-0494-20

Diamond wire for one side of a Hobie® 18 is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included.

Please note: The diamond wire will be constructed with a stud that has left hand threads. Please contact Murrays if you have an older Hobie® 18, as right hand threads may be required.

The change to the left handed thread happened some time in the early 80's.

Murrays Sports

H-18 DIAMOND WITHOUT TURNBUCKLE

Sailsport Marine

5

(23)

FSE Robline Orion

FSE Robline Orion

FSE Robline 8 Plait

FSE Robline Dinghy Sheet XL

FSE Robline Ocean 3000

H18 Traveler Cylinder Bearing Set

Murrays Part# 50-61852000

Hobie® factory replacement cylinder bearing set for Hobie® 18 main traveler. Set includes one pair.

Murrays Sports

H-18 TRAVELER CYLINDER BEARING SET

Jib Clew Pigtail Kit

Murrays Part# 001-4015

Easy-connect Dyneema® jib clew pigtail. Speed up tacks and improve sail shape by moving jib clew blocks away from the jib clew.

Color may vary from picture.

Features:

jib Clew Pigtails move jib clew blocks about 14" from jib clew— saves 4 feet of sheeting/unsheeting per tack!
"Locked" eye splices— jib blocks cannot slip or un-tie.
Save weight (only 2.4oz) and move weight away from jib clew— better sail shape in light wind.
Lightweight, easy-connect—

Murrays Sports

JIB CLEW PIGTAIL KIT

H18 Angled Luff Batten Caps
Murrays Part# 012-4005
No more battens poking through next to the mast. Ten angled Tren Tec luff caps for Hobie® 18 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten.
Hobie Part# 1563
Sold in packages of 10

Murrays Sports

H-18 ANGLED LUFF BATTEN CAPS

Hull Cradle: Bow

Murrays Part# 13-7030

Murrays Sports

HULL CRADLE: BOW

Hobie 1953 tiller connection kit - new style

Murrays Sports

HOBIE TILLER CONNECTOR KIT

(1)

H18 Telo-Cat/Hobie Vane Adapter

Murrays Part# 008-1451

Adapts the Telo-Cat (#08-1450) or Hobie® (#04-7703) vane to the Hobie 18 furling drum. When using to adapt a Telo-Cat vane for use on a Hobie 18, it is necessary to enlarge one hole in the plastic part of the vane to accommodate a clevis pin.

Hobie Cat® Part# CM7705

Murrays Sports

ROLLER FURLER BRIDLE VANE ADAPTER

Roller Furling Drum Forestay Adjuster

Murrays Part# 50-60830000

Hobie® factory replacement 13-hole adjuster for roller furler.

Hobie Part# 60830000

Murrays Sports

ROLLER FURLING DRUM FORESTAY ADJUSTER

(1)

Murrays Sports

TIGER BRIDLE 5/32"

The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail.
Compare to Hobie part number 38651001.

Murrays Sports

WAVE MAIN HALYARD

Murrays Sports

HOBIE ROLLER FURLING DRUM 1" NYLINER

Hobie Tracker Deck Plate

Murrays Part# 007-1051

The standard replacement deck plate for the traveler on all Hobie® 14, 16 and newer 17's

Uses a 3/16 x 1/2" clevis pin to attach to the main sheet system.

Also used in Hobie 14 and Hobie 16 upgrade downhaul systems to secure lower block.

Sold individually

Hobie part# 11870000

Murrays Sports

TRACKER DECK PLATE (EA)

H18 Diamond Wire with Turnbuckle

Murrays Part# 002-0494-40C

Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles.

Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging.

Murrays Sports

H-18 DIMOND WIRE WITH TURNBUCKLE

Rudder Pins H17, H18, Wave, Getaway (Aluminum)
Murrays Part# 001-4274
Aluminum rudder pins for the Hobie 17, 18, Wave and Getaway.  Aluminum 3/8″ x 9-1/4″ rudder pins, cotter pins are included. 

Sold in pairs

Compare to Hobie Cat® #60880001

Murrays Sports

H-17/18/WAVE AND GETAWAY ALUMINUM RUDDER PINS

H18 Main Traveler Ball Bearing Set

Murrays Part# 50-61850002'

Hobie 18 Main Traveler Ball Bearing Set includes two traveler ball bearings (#50-61850000), plus one 2" cotter pin (#50-8060121).

Murrays Sports

H-18 MAIN TRAVELER BALL BEARING SET

H18 Nylon Roller Furler Sleeve

Murrays Part# 50-61940000

Hobie® factory replacement nylon sleeve for roller furling assembly.

Hobie Part# 61940000

Murrays Sports

HOBIE NYLON ROLLER FURLER SLEEVE

Hobie 18/21Sport Edition Boom Cleat Clamp

Murrays Part# 50-61711000M 

The Hobie boom clamp mounts the clamcleat (#27-0702) on to a Hobie 18 boom. Two boom clamps are required to mount one cleat.

This is a Murrays product, made with an Anodized aluminum body and a 316 stainless steal screw insert.  Made in California, USA.

Compare to Hobie part# 61711000 discontinued by Hobie

Murrays Sports

H-18/21SE BOOM CLEAT CLAMP

Getaway Main Halyard

Murrays Part# 002-0973-60

The Murrays Hobie Getaway main halyard for is constructed to the current factory specs. It has a long rope section and a shorter wire section with a stopper and halyard shackle. The rope section is easy on the hands and prevents electrical current from traveling down the mast in the event of an electrical wire contact.
Compare to Hobie part number 37651001

Murrays Sports

GETAWAY MAIN HALYARD

Roller Furler Drum Ball Bearing
Murrays Part# 50-61670000
Hobie® factory replacement bearing for Hobie roller furler. A total of 18 ball bearings are required per furler.

Murrays Sports

HOBIE ROLLER FURLER BEARING

(1)

H18SX Bridle 5/32" Black Wire

Murrays Part# 002-0615-22

Single black bridle for Hobie® 18SX is constructed of 5/32" wire to factory specifications.

Compare to Hobie Cat® Part# 60822001 Black or 60820001 White

Murrays Sports

H-18SX BRIDLE 5/32" BLACK WIRE

H18 Halyard Lock (Comptip)

Murrays Part# 50-61610101

Halyard hook for Hobie 18 comptip mast assembly.

Hobie Part# 61610101

Murrays Sports

H-18 HALYARD HOOK (COMPTIP)

Carbine Hook (Plastic)

A quick connection of trapeze shock cord to height control adjustment. 2-1/4" long. Compare to Hobie Cat® #2101.

Murrays Sports

PLASTIC CARBINE HOOK

Wave Forestay 1/8" Black
Murrays Part# 002-0844-02
One black forestay for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® #39810001.

Murrays Sports

WAVE FORESTAY 1/8" BLACK WIRE

Drift

Drift

Drift

4.2

(315.9K)

H20 Bridle 5/32" Black Wire

Murrays Part# 002-0715-22

One bridle for Hobie® 20 is constructed to factory specifications. 

Compare to Hobie Cat® Part# 40822001

Murrays Sports

H-20 BRIDLE 5/32" BLACK WIRE

H18 1-Piece Bias Cut Trampoline-Black

Murrays Part# 30-3103-2

This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials.

Murrays Sports

H-18 1PC BIAS CUT TRAMPOLINE-BLACK

H20 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-0705-12

Single shroud (sidestay) for Hobie® 20 is constructed to factory specifications. Hydraulic swaging produces a cleaner, stronger shroud than standard double swaging.

Compare to Hobie Cat® Part# 40792001

Murrays Sports

H-20 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

Main Halyard Ring (Murrays)

Murrays Part# 001-4216

If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Hobie Aussie Ring (#07-3064).

This item replaces discontinued Part

Murrays Sports

MAIN HALYARD RING (MURRAYS)

Getaway Forestay 5/32" Black Wire

Murrays Part# 002-0945-12

The Hobie Getaway forestay is made with 5/32" black vinyl coated type 316 stainless steel wire and fittings. This forestay is compatible with all generations of Hobie Getaways.

Compare to Hobie Cat Part# 37810001

Murrays Sports

GETAWAY LOWER FORESTAY 5/32" BLACK WIRE

(1)

Hobie 18 shroud - side stay - Hobie part number 6079001 white and 60792001 black

Murrays Sports

H-18/21 SC SHROUD 5/32" ROLLER SWAGED

H-18 Surefoot EVA Deck Grip Kit - Peel and Stick

The Hobie 18 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn't absorb water the way carpet does, so there is minimal weight when it gets wet and it dries quickly!

Hobie 18 kit includes four 3" x 40" strips and four 3" x 20" strips - covers the side rails

Murrays Sports

H-18 SUREFOOT EVA Deck PEEL AND STICK GRIP KIT

H18SX Jib Halyard with Shackle

Murrays Part# 002-0686-00

Jib halyard with shackle for Hobie® 18SX is constructed to factory specifications.;

Use 20' of 1/8" line to to complete your jib halyard or our jib halyard kit with sister clips. links below in related items.

Compare to Hobie Cat® Part# 68661001

Murrays Sports

H-18SX JIB HALYARD WITH SHACKLE

(1)

Getaway Shroud 5/32" Black Wire

Murrays Part# 002-0905-02

Single black shroud (sidestay) for Hobie® Getaway is constructed to factory specifications.

Compare to Hobie Cat® Part# 37790001

Murrays Sports

GETAWAY SHROUD 5/32" BLACK WIRE

(1)

H18SX Upper Forestay 5/32" Black Wire

Murrays Part# 002-0635-02

Black upper forestay for Hobie® 18SX is constructed to factory specifications.

Compare to Hobie Cat® Part# 68813501

Murrays Sports

H-18SX UPPER FORESTAY 5/32" BLACK WIRE

H18 Mast Base Casting-Black

Murrays Part# 50-60641031

Hobie® factory replacement black mast base casting for Hobie® 18. Use four #19-5032 rivets for installation.

Murrays Sports

H-18 MAST BASE CASTING-BLACK

SAFETY HOOK KNIFE FORWARD
Murrays Part# 47-0700-2
Forward Hook Safety Knife, can be used in conjunction with the Forward Impact Vest.
The Forward impact vest has a special pocket inside the webbing sleeve to store a Forward Hook Safety Knife.

31% off

Murrays Sports

FORWARD SAFETY HOOK KNIFE

Murrays Sports

TRACKER HINGE PIN

Hobie Mast Step Pin 3/16 x 2 1/8" - 8020080

Replacement Hobie 14 and Hobie 16 mast step pin.

Measures 3/16" x 2-1/8"

Used with the Hobie mast step link kit 21380001 for raising and lowering the mast on a Hobie 14 and 16.

Also called Hobie 16 mast hinge pin, mast step hinge pin, mast base pin, mast step link pin...

Hobie part number 8020080

Murrays Sports

HOBIE MAST STEP PIN 3/16 X 2 1/8 - 8020080

H16 Mast Base

Murrays Part# 50-20640011

The Hobie 16 Mast Base is the part that fits in the bottom of the mast and is attached to the mast with rivets. Works with all Hobie 16 sailboats.

Attaches to bottom of Hobie 16 mast
Use three (3) Part # 8010131 rivets to secure fitting

Hobie Cat Part# 20640011

Murrays Sports

H-16 MAST BASE

Clamcleat (Aluminum)

Murrays Part# 27-0702

Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4".  2 5/8" hole spacing.

This cleat is a substitution for Hobie Part# 61070000

Murrays Sports

CLAMCLEAT (ALUMINUM)

Hobie 18 mast step hinge pin, has a hole on one end only. The headless clevis pin measures 1/4″ diameter by 3-3/8″ grip length Hobie Part # 8020501

Murrays Sports

HEADLESS CLEVIS PIN 1/4 X 3-3/8"

Wave Bridle 1/8" Black
Murrays Part# 002-0814-02
One black bridle for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® 39822011.

Murrays Sports

WAVE BRIDLE 1/8" BLACK WIRE