Murrays Sports ADJUSTABLE LEECH JIB BATTEN CAP (EA) - Shop

You might also like

Batten Cap Leech H14/16/17/18 Main E

Murrays Part# 012-3003-1

No more knots at the trailing edge. Adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual batten cap for Hobie 14, 16, 17 or 18 main sail.

Mainsail batten cap for Saturn shape main sail battens used on Hobie, Prindle some Nacra sails.

Trentec part number BC-HM

Compare to Hobie 11323000

Sold individually

Murrays Sports

H-14/16/17/18 MAIN BATTEN LEECH CAP

Murrays Sports

HOBIE TILLER CROSSBAR ADJUSTABLE END CAP - 60400011

Batten Cap Hobie Main Leech
Murrays Part# 50-11323000
Hobie® factory replacement part number 11323000.
Hobie batten cap are sold individually.
Order batten tie separately; 18" of 1/8" line per batten cap is standard.
Sold individually

Murrays Sports

HOBIE MAIN LEECH BATTEN CAP

Murrays Sports

H-16 JIB FIBERGLASS BATTEN SET

SUPER GOOSE H-17/18/20/21
This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing.

The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model.

Hobie part number 1510

Murrays Sports

H-17/18/20/21 SUPER GOOSE

Batten Cap Leech Adjustable H16 Jib
Murrays Part# 012-3004
No more knots at the trailing edge. Adjust Hobie® 16 jib sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual cap.
Sold in packages of 4

Murrays Sports

ADJUSTABLE JIB BATTEN CAPS (4)

Hobie 20-style factory tiller connector post. Part of the Hobie 1953 tiller connection system. Hobie part number 40530000 and 40530001

Murrays Sports

H-20 TILLER CONNECTOR POST

Main Halyard Ring (Murrays)

Murrays Part# 001-4216

If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Hobie Aussie Ring (#07-3064).

This item replaces discontinued Part

Murrays Sports

MAIN HALYARD RING (MURRAYS)

H14 Angled Luff Caps
Murrays Part# 012-2006
No more battens poking through next to the mast. Tren Tec angled luff caps for Hobie® 14 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten.
Hobie Part# 1561
Sold in packages of 6

Murrays Sports

H-14 ANGLED LUFF CAPS (6)

H18 Angled Luff Batten Caps
Murrays Part# 012-4005
No more battens poking through next to the mast. Ten angled Tren Tec luff caps for Hobie® 18 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten.
Hobie Part# 1563
Sold in packages of 10

Murrays Sports

H-18 ANGLED LUFF BATTEN CAPS

Hobie Halyard - Downhaul Cheek Block - 20710000
Murrays Part# 25-3340
The plastic sheave degrades and breaks on older Hobie® 16 downhaul cheek blocks and the entire block must be replaced. Also fits Sol Cat 18. Hole spacing 1/2" on center from side to side; 2-3/4" on center from end to end.
To install, use four #19-5031 6-4 rivets and four #19-5020 sealing casings.
Hobie Cat® Part# 20710000.

Murrays Sports

HOBIE CHEEK BLOCK - 20710000

TILLER ARM INSERT Hobie factory tiller arm insert for 1953 tiller kit. Hobie part number 40660001. Murrays.com In stock

Murrays Sports

HOBIE TILLER ARM INSERT

Air Flow Tels Set

Murrays Part# 007-0334

Air-flow Tels are wind-on-the-sail indicators that show the air flow across the sails, allowing you to trim sails for maximum performance. The result is better boat speed, less pinching, and no guesswork about placing the jib sheet lead forward or aft. No holes are required in the sails; waterproof adhesive locator discs attach the Tels. Tels are made of ripstop nylon for maximum sensitivity and long life.

Murrays Sports

AIR FLOW TELS SET

Clevis Pin 3/16 X 5/8"

Murrays Part# 22-9805

Stainless steel clevis pin. Measurement is 3/16" diameter x 5/8" grip length (shoulder to the split ring hole).
Hobie Cat Part number 8020041

Murrays Sports

CLEVIS PIN 3/16 X 5/8"

Murrays Sports

H-18 LINE PACKAGE

Tren Tec Hobie 16 main sail luff batten caps prevent batten splitting and align batten to the angle of the sail. Glue cap to the forward end of the batten.

Increases the life of the sail

Prevents battens ripping the sail pockets

Prevents battens from splitting

Aligns battens to the angle of the sail

Sold in packages of 8

Hobie Part# 1562

Murrays Sports

H-16 ANGLED LUFF CAPS (8)

H16 Mistral Jib Sail

Murrays Part# 50-209920611

This is an OEM Hobie 16 Jib Sail with the Mistral Pattern. This is class legal for Hobie One Design Racing or colorful recreational fun!

Hobie Part# 209920611

Murrays Sports

H-16 JIB SAIL (MISTRAL)

Hobie Tiller Extension Hinge

Murrays Part# 50-10532010

Hobie® factory replacement tiller extension hinge for #50-20550001 Hobie® Fiberglass tiller extension. Also used on Nacra tillers.

Hobie Part Number: 10532010

Murrays Sports

HOBIE TILLER EXTENSION HINGE

Sail Pocket Protector Kit Jib

Murrays Part# 001-1002

The Jib Sail Pocket Protector Kit includes one pair of tough nylon protectors with indentations for included rivets that are set with a hammer.

Murrays Sports

JIB SAIL POCKET PROTECTOR KIT

The Hobie 18 Trapeze Shock Cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. On this kit for Hobie® 18, one hook connects to either the thimble on the trapeze wire or the adjustment line, then runs through the hull fairlead and through the eyestrap under the lip of the hull near the bow or stern for crew and skipper trapeze lines respectively. The 3/16" shock cord stretches more and slides through ferrules better than larger diameter shock cord. Includes four

Murrays Sports

H-18 TRAP SHOCK CORD (4)

(1)

H14/16 Aluminum Rudder Pins

Murrays Part# 001-2272

Aluminum rudder pins are standard on Hobie® 14 and 16 and are good for all-around, low maintenance use. Pair of 3/8" x 8" rudder pins with cotter pins.

New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be difficult to remove. The stainless pins are a better fit.

Sold in pairs

Murrays Sports

H-14/16 ALUMINUM RUDDER PINS

Screw H20 Connector 10-24 X .25"

Murrays Part# 50-8032401

Hobie® factory replacement screw for Hobie 20 tiller connector. Stainless steel 10-24 x 1/4" pan-head machine screw with Phillips head.

Hobie Part# 8032401

Murrays Sports

H-20 CONNECTOR SCREW 10X24X.25"

F4 Foils

4.9

(29)

Murrays Sports

PLASTIC CONTOURED SPACER

Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras.
Applications:
Hobie 18 / H18:
Bow Tang Nut Qty: 6
Rudder Adjustment: 1
Hobie Getaway: Forestay Yoke Nut

Murrays Sports

NYLOCK NUT 1/4-20 SS

The Murrays Hobie 16 one piece rudder gudgeon is not cast but machined and then anodized for superior strength and longevity.

Compare to Hobie 50102011

Murrays Sports

MURRAYS H-16 ONE PIECE RUDDER GUDGEON

Hobie 1953 tiller connection kit - new style

Murrays Sports

HOBIE TILLER CONNECTOR KIT

(1)

Carbine Hook (Plastic)

A quick connection of trapeze shock cord to height control adjustment. 2-1/4" long. Compare to Hobie Cat® #2101.

Murrays Sports

PLASTIC CARBINE HOOK

Wave Bridle 1/8" Black
Murrays Part# 002-0814-02
One black bridle for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® 39822011.

Murrays Sports

WAVE BRIDLE 1/8" BLACK WIRE

Murrays Tell Tails Pack of 16

Murrays PN 001-3825

Black ripstop nylon tell-tales attach to the sail with adhesive patches to visually aid in trimming the sail.  Compatible with both the main and jib sails.

Set includes:

6 x pairs of Black tell tails

4 x Black Leech tell tails

Murrays Sports

MURRAYS TELL TAIL SET

saltcitysailing

5

(16)

Hobie Mast Step Pin 3/16 x 2 1/8" - 8020080

Replacement Hobie 14 and Hobie 16 mast step pin.

Measures 3/16" x 2-1/8"

Used with the Hobie mast step link kit 21380001 for raising and lowering the mast on a Hobie 14 and 16.

Also called Hobie 16 mast hinge pin, mast step hinge pin, mast base pin, mast step link pin...

Hobie part number 8020080

Murrays Sports

HOBIE MAST STEP PIN 3/16 X 2 1/8 - 8020080

H14/16/18 Gooseneck Boom Pin

Murrays Part# 50-10772010

Hobie® factory gooseneck boom pin for Hobie® 14, 16 or 18.

Murrays Sports

H-14/16/18 GOOSENECK BOOM PIN

This harness has been reimagined, redesigned, and rigorously tested by the Rooster team to provide the ideal amount of support and comfort on the Trapeze.
The curved and pre-shaped body can be adjusted at 3 points on each side to allow adjustment down the upper back, across the middle, and up from the seat panel, to tailor the fit to different shapes.

Murrays Sports

ROOSTER TRAPEZE HARNESS Nappy Style

Roller Furling Drum Forestay Adjuster

Murrays Part# 50-60830000

Hobie® factory replacement 13-hole adjuster for roller furler.

Hobie Part# 60830000

Murrays Sports

ROLLER FURLING DRUM FORESTAY ADJUSTER

(1)

HOBIE TILLER EXT BUSHING

Murrays Part# 50-40300001

This is the bushing that goes into the tiller crossbar of most Hobiecat Sailboats. This part was discontinued or otherwise no longer available as a separate part.

Compare to Hobie part# 40600001

Murrays Sports

HOBIE TILLER BUSHING EXTENDER

H-16 JIB BATTEN 67"

67" Murrays jib batten with a trentec batten cap.

Batten #1 in a Hobie 16 jib batten set - 20400001

Murrays Sports

H-16 JIB FIBERGLASS BATTEN 67"

Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.

Murrays Sports

TELO-CAT REPLACEMENT VANE - DISCONTINUED

Dacron 3oz Sail Tape-White

Murrays Part# 010-3430

Quickly mend tears in Dacron sails, covers, rain gear and seats. The heavy-duty, 3-oz. Dacron sailcloth makes long-lasting emergency repairs or provides effective reinforcement for worn areas. Features quick marine adhesive backing; can be stitched for permanent repair. Our white Dacron sail repair tape is 3" x 15'.

Murrays Sports

DACRON 3OZ MAINSAIL TAPE-WHITE

H14/16 Rudder Return Hand Shock Cord

Murrays Part# 001-2240

Two 32" shock cords with balls keep your Hobie® 14 or 16 rudders down when the cams don't! Order Kisme Kleets #05-1010 separately, if needed.

Murrays Sports

H-14/16 RUDDER RETURN HAND SHOCK CORD

Murrays Sports

RONSTAN JIB TRACK END CAP

STRETCH RIGHTING H14/16/17/18

Murrays Part# 001-3294

The Murrays Stretch Righting Kit is our most popular righting line kit for catamarans such as Hobie® 14, 16, 17, 18 and 18SX. If the bow starts to bury, the line is readily available to both skipper and crew who can anchor themselves to keep from being catapulted forward. This beautifully simple system features easy-to-grip, 1/2" hollow braid line with internal shock cord that stretches for righting or trapezing and then recoils automatically

Murrays Sports

H-14/16/17/18 STRETCH RIGHTING

Mast Hinge H-16 (Only)
Murrays Part# 25-3360
Heavy duty mast base hinge for Hobie® 16 only (does not fit Hobie 14). Clevis pins are sold separately.
NOTE: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step. The way to tell is if your mast step has a horizontal mast base then it is old style, new style has a slant toward the stern.

Murrays Sports

H-16 (ONLY) MAST HINGE

(1)

H18 Thru-Deck Fairlead

Murrays Part# 50-60270000

Fairlead Thru-Deck H18 for trapeze shock cord for skipper and crew trapeze lines that go through the lip on the outside of the hull.

Center hole on this fairlead is 7/8" diameter and is sleeved with a stainless steel ferrule. Mounting screw holes have a center-to-center measurement of 1-3/8". Hobie® factory replacement part.

Hobie Part# 60270000

Murrays Sports

H-18 THRU-DECK FAIRLEAD

H18 Main Adjustable Batten Leech Caps
Murrays Part# 012-4003
No more knots at the trailing edge. Adjust Hobie® 18 main sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life.
Hobie Part# 1523
Sold in packages of 10

Murrays Sports

H-18 MAIN ADJUSTABLE BATTEN LEECH CAPS (10)

Batten Caps Luff H16 Jib (Pack of 4)
Hobie Part# 012-3006
No more battens poking through next to the mast. This Tren Tec item includes four Hobie® 16 jib luff batten caps to prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Cat® uses #1566 for this item

Murrays Sports

H-16 JIB BATTEN LUFF CAPS (4)

Rudder Pins H17, H18, Wave, Getaway (Aluminum)
Murrays Part# 001-4274
Aluminum rudder pins for the Hobie 17, 18, Wave and Getaway.  Aluminum 3/8″ x 9-1/4″ rudder pins, cotter pins are included. 

Sold in pairs

Compare to Hobie Cat® #60880001

Murrays Sports

H-17/18/WAVE AND GETAWAY ALUMINUM RUDDER PINS

Clamcleat (Aluminum)

Murrays Part# 27-0702

Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4".  2 5/8" hole spacing.

This cleat is a substitution for Hobie Part# 61070000

Murrays Sports

CLAMCLEAT (ALUMINUM)

Sailsport Marine

5

(23)

FSE Robline Orion

FSE Robline Orion

FSE Robline 8 Plait

FSE Robline Dinghy Sheet XL

FSE Robline Ocean 3000

Shroud Stay Adjuster 7 Hole

Murrays Part# 25-3310

Stainless steel shroud adjuster with seven 1/4" holes.

Use #22-9802 clevis pin at top and #22-9808 at bottom.

Fits: H14/16/18/20, Wave and Getaway.

Compare to Hobie Part# 20830010
Nacra - Prindle part number 9893

Murrays Sports

SHROUD STAY ADJUSTER 7-HOLE

(1)

Shock Cord Tramp Lacing Kit H14/16/18

Murrays Part# 001-2241

Shock Cord Tramp Lacing Kit H14, 16, 18 is for the recreational sailor who is lacing a trampoline. Shock Cord is usually the better choice over line tramp lacing. Just "set it and forget it" because shock cord maintains the tension you set when lacing your tramp. Shock cord also reduces tramp and grommet wear because the load is spread over multiple grommets, especially when walking on the tramp. The latest technology shock cord used in our kits

Murrays Sports

H-14/16/18 SHOCK CORD TRAMP LACING KIT

Murrays Sports

NUT LOW PROFILE 5/16-24" NYLOCK

H16 Jib Halyard with Shackle

Murrays Part# 002-0284-00

Jib halyard with shackle for Hobie 16 is constructed to factory specifications.

This is for use on the classic style H16 jib halyard system with a metal sheave up near the mast tang that was standard in the 70s and 80s.

The rope section of the jib halyard is 20' of 3/16ths line.

Compare to Hobie Part# 20661001

Murrays Sports

H-16 JIB HALYARD WITH SHACKLE

Murrays Sports

H-18/20 JIB HALYARD WITH CLIP

H-16 JIB BATTEN 44"

44" Murrays jib batten with a trentec batten cap.  

Batten #3 in a Hobie jib batten set - 20400001

It is also use for the batten #8 on a Hobie 16 main sail batten set - 21000001

Murrays Sports

H-16 JIB FIBERGLASS BATTEN 44"

Hobie 16 Aussie Jib Halyard Kit with Pigtail Murrays Part# 001-3302
Reduce mast compression by 66%! The Aussie Jib Halyard Kit for the Hobie® 16 allows easier tacking, better mast rotation and consistent mast bend! Use with existing lower forestay. The "fail-safe" pigtail keeps block failure from resulting in de-masting. A similar system is stock on new Hobie 16's. Complete kit includes everything you need: hardware with all Harken blocks, 70' of prestretched line, zippered pouch and instructions. 80660000

Murrays Sports

H-16 AUSSIE JIB HALYARD KIT WITH PIGTAIL

5"X12" Zip Pouch-Assorted Colors

Murrays Part# 31-1401

The Murrays Zip Pouch 5"X12" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A.

Compare to Hobie Cat® stow bag #72000B and 72005B

Murrays Sports

5"X12" ZIP POUCH-ASSORTED COLORS

Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head

Murrays Part# 21-0634

Solid stainless steel bow shackle has 3/16" diameter pin. 

UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.

Murrays Sports

RONSTAN 3/16" BOW SHACKLE

Wave/Getaway Shroud Anchor Plate

Murrays Part# 50-39100011

Hobie® factory replacement shroud anchor chain plate for Club Wave or Getaway. The Club Wave has a three-piece trampoline and shrouds and bridles connect with clevis pins. Current boats use two plates per side.

Hobie Part# 39100011

Murrays Sports

WAVE/GETAWAY SHROUD ANCHOR PLATE

H16 Aussie Pigtail Assy
Replacement 5/32" pigtail for Aussie jib halyard kit for Hobie® 16 (#01-3302)

Murrays Sports

H-16 AUSSIE PIGTAIL ASSY

(1)

Batten Cap Jib Leech H16
Murrays Part# 50-2133000
Hobie® factory jib leech batten cap for Hobie® 16. For batten tie, use 18" of 1/8" Dacron® solid braid #39-0221.
These are also used on the top two battens of a Hobie Wave and the top batten of a Hobie 18 Mainsail.
Sold individually

Murrays Sports

HOBIE JIB BATTEN LEECH CAP (EA)

Screw 1/4-20 x 5/8 PHMS-P Stainless Steel
Murrays Part# 50-8030331
This screw is used on the Hobie wave to secure the eye straps to the inner edge of the crossbars for connecting the tramp pulleys on the classic wave or "other" on the club version.

Murrays Sports

SCREW 1/4-20 x 5/8" PHMS-P SS

Murrays Sports

H-16 ROLLER FURLING JIB KIT

6" Access Port with Lip

Murrays Part# 001-4210WH

The 6" Access Port with Lip is standard on the Hobie 18 and newer Prindle cats and it is an excellent upgrade for older Prindles. Ports can be installed on any flat deck, including kayaks, where there is 8-1/2" of flat surface available. These ports come with the inner lip so they are compatible with the 6"cat bag. Does not include hardware, hardware options shown in the related items section below.

White port is Murrays #01-4210WH. Compare to Hobie Cat® #

Murrays Sports

6" ACCESS PORT WITH LIP

Hobie 18 Mast Base Hinge casting
60650011

Murrays Sports

H-18 MAST BASE HINGE

HOBIE WAVE TILLER CROSSBAR

Murrays Sports

HOBIE WAVE TILLER CROSSBAR M20 STYLE

Nut Nylock 5/16-18 Stainless Steel
Murrays Part# 19-2520
5/16-18 nylock nut is used on Hobie® rudders. The stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Compare to Hobie Cat® item #8050311 and 8050321 shroud anchor pin nut
Used with Hobie Getaway Bow Tang Bolt

Murrays Sports

NUT NYLOCK 5/16-18 (SS)

Hobie 6 BRIDLE WIRE
The H-16 Bridle Wire is one bridle for Hobie 16 constructed of 316 stainless steel wire to factory specifications. We recommend purchasing two bridles in order to ensure equal length and strength of your bridle wires. Wire lengths changed over the years, please select the appropriate bridle wires for your boat. We recommend Black coated for the longest lifespan.

Murrays Sports

H-16 BRIDLE WIRE

(1)

Rudder Pins H17/18 Stainless Steel

Murrays Part# 001-4273

Weight-saving compared to solid stainless steel pins, hollow stainless rudder pins with still beefy .065″ wall provide reduced wear and the good long-term durability. The universal stainless steel 3/8″ x 9-1/4″ rudder pins are suited for; Hobie 17/18/20 rudder castings. Also used on older Hobie Wave and Getaways with metal rudder castings.

Cotter pins are included.
Alternative to Hobie Cat® #60880011.  (* Pre EZ LOC Rudder c

Murrays Sports

H-17/18 RUDDER PINS PR (SS)

(1)

This is for use on the classic style Hobie 16 jib halyard system with a short upper forestay and metal pulley up near the mast tang that was standard in the 70s, 80s and early 90s.

There are 2 styles of Hobie 16 jib halyard. This wire Hobie 16 jib halyard works with the old style upper and lower forestay and the metal halyard pulley. The 2nd style is the Aussie jib halyard with it's parallel forestay and jib halyard that became stock in the mid 1990s.
Compare to Hobie Part# 20661001

Murrays Sports

H16 JIB HALYARD WITH LINE

Hobie 18 mast step hinge pin, has a hole on one end only. The headless clevis pin measures 1/4″ diameter by 3-3/8″ grip length Hobie Part # 8020501

Murrays Sports

HEADLESS CLEVIS PIN 1/4 X 3-3/8"

Drift

Drift

Drift

4.2

(315.1K)

Hobie Wave rigging kit, 2 shrouds, 2 bridles and a forestay

Murrays Sports

H WAVE RIGGING KIT

H16 Mast Base

Murrays Part# 50-20640011

The Hobie 16 Mast Base is the part that fits in the bottom of the mast and is attached to the mast with rivets. Works with all Hobie 16 sailboats.

Attaches to bottom of Hobie 16 mast
Use three (3) Part # 8010131 rivets to secure fitting

Hobie Cat Part# 20640011

Murrays Sports

H-16 MAST BASE

Hobie Sail Feeder Kit

Murrays Part# 50-80100501

Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.

Murrays Sports

HOBIE SAIL FEEDER KIT

Adjustable Leech Batten Caps H16
Murrays Part# 012-3003
No more knots at the trailing edge. Adjustable batten caps for Hobie® 16 enable sail shape adjustment in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 8 batten caps and pre-cut line.

Murrays Sports

H-16 ADJUSTABLE BATTEN LEECH CAPS (8)

Rudder Cam Screws H17, H18, H20,
Older Wave and Getaway
Murrays Part# 001-3551
The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable.
Compare to Hobie Cat® #5203 and #50312301.
Sold in pairs

Murrays Sports

H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS

Washer 3/8 X 3/4 Nylon for 07-1953
Murrays Part# 50-8080691
Washer for tiller arm bolt #50-8040171. Hobie® factory item

Murrays Sports

WASHER NYLON 3/8 X 3/4"

Hobie Tracker Deck Plate

Murrays Part# 007-1051

The standard replacement deck plate for the traveler on all Hobie® 14, 16 and newer 17's

Uses a 3/16 x 1/2" clevis pin to attach to the main sheet system.

Also used in Hobie 14 and Hobie 16 upgrade downhaul systems to secure lower block.

Sold individually

Hobie part# 11870000

Murrays Sports

TRACKER DECK PLATE (EA)

Murrays red, green and blue tell tails. Sail trimming guides.

Murrays Sports

MURRAYS TELL TAIL SET

H14/16 Mast Bearing (Pack of 100)

Murrays Part# 001-2042

Teflon® mast bearings for Hobie® 14 or 16 are .06" thick and will form to mast base with first use. Package of 100 mast chips.

Murrays Sports

H14/16 MAST BEARING (100-PKG)

Hobie 16 turquoise mesh trampoline Hobie 20970058

Murrays Sports

H-16 BLUE TRAMPOLINE WITH TEFLON THREAD

Murrays Sports

RONSTAN 1/4" BOW SHACKLE

(1)

Gooseneck Boom Pin

Murrays Part# 50-50502201

Hobie Cat gooseneck boom pin for securing boom assembly to mast at the gooseneck joint.

Hobie Part# 50502201

Murrays Sports

HOBIE GOOSENECK BOOM PIN

The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail.
Compare to Hobie part number 38651001.

Murrays Sports

WAVE MAIN HALYARD

The Hobie Wave Forestay Adjuster w/ Toggle
Murrays PN 001-2085
The Murrays Wave Forestay Adjuster with Toggle is a must have for speeding up the rigging process on your Hobie Wave. This adjuster includes a toggle pin with lanyard that can't fall off of your bridle assembly. This allows you to easily raise and pin the mast single handed! The toggle is affixed around the center of the adjuster with a slightly longer lanyard to keep it out of the way of your bridle vane or other accessories.

Murrays Sports

WAVE FORESTAY ADJUSTER W/ TOGGLE PIN

Replace a 3/16" bow shackle with this quick-release version to add convenience. Can be used on 2-1/4" blocks. Compare to Hobie Cat® #3062.

Murrays Sports

QUICK RELEASE 3/16" BOW SHACKLE

Screw RHMS 5/16-18 X 1.25" Stainless Steel

Murrays Part# 19-3530

Stainless steel round head machine screw measures 5/16-18 x 1-1/4". Bow Tang Bolt

Equivalent to Hobie Cat® Part# 8030301

Murrays Sports

SCREW RHMS 5/16-18 X 1.25 (SS)

Murrays Sports

H-16 JIB CLEW BLOCK KIT

Hobie factory replacement retainer clip for Hobie 20-style tiller connector and adjuster kit (#07-1953). TILLER CONNECTION RETAINER CLIP - HOBIE 20. 40590000 MURRAYS.COM - IN STOCK

Murrays Sports

H-20 TILLER CONNECTOR RETAINER CLIP