The Chassis Shop Complex 4130N Chromoly Bend - Shop

You might also like

Diagram of a 4130N chromoly tube bend labeled degree of bend, showing a 45° angle between the straight run and the bent section

The Chassis Shop

Acute Angle 4130N Chromoly Bend

(1)

Pro-Werks pre-bent 4130N chromoly front hoop, 1-1/8 in. x 0.083 tube formed in a U-shaped double bend with straight parallel legs

The Chassis Shop

Pro-werks 6 Point Pre-Bent Chromoly Hoop, 4130N

(1)

Aurora male rod end in 4130N chromoly, angled view showing the threaded shank and the swaged ball with its bore

The Chassis Shop

Aurora Male Heavy Duty Chromoly Rod End

TMR Customs

4130 Chromoly Competition Trailing Arms - DIY

4 Link Bar Kit - Chromoly Heim Rod End

Subroza Race Chassis

4 Link Bar Kit - Chromoly Heim Rod End

Moore Race Chassis

10-32 Tab - Chromoly

Pro-Werks pair of 4130N chromoly steel gusset brackets for front axle welding, bare laser-cut plate with 5/16 inch holes and radiused notch for 1-1/2 inch tube

20% off

The Chassis Shop

Pro-werks 5/16 Inch Holes, 3/16 Inch Thick, Fits 1-1/2 Inch Tube, 4130N Chromoly Front Axle Weld Brackets, Pair

Nine Lives Racing

4.9

(131)

Poly Suspension Joint

Barnes 4WD

Forged Chromoly Poly Joint 2 5/8" MW, 9/16" BH, 1 1/4"-12 RH

(7)

speedwayparts.co.nz

Chromoly Male Rod Ends

VMS Motorsports

1/2" B-Series 4130 Chromoly Steel Heim Joint / Rod End

(2)

VMS Motorsports

5/8" B-Series 4130 Chromoly Steel Heim Joint / Rod End

Active Autowerke Chassis Brace for BMW G20 M340i G22 M440i 2018+

2% off

AutoTalent

Active Autowerke Chassis Brace | BMW G20 M340i | G22 M440i 2018+

QS Components, Inc.

3/8 x 3/8-24 Chromoly 4 Link Kit With Weld-In Bung .058 & Jam Nuts

Moore Race Chassis

MRC Chromoly Single Chute Mount Kit

Two pre-bent 4130N chromoly tubes from Pro-Werks, each with a 90-degree bend and one short leg and one long leg, on white

The Chassis Shop

Pro-werks Pre-Bent Chromoly Head Bar Kit, 4130N

Pro-Werks pair of pre-bent 4130N chromoly tubing seat bars, 1-1/4 in. x 0.058 wall with a 20° bend

The Chassis Shop

Pro-werks Pre-Bent Chromoly Seat Bar 4130N, Pair

Pro-Werks 4130N chromoly wing strut kit laid out: black tubing lengths, threaded adjuster rods with rod ends, clevis fittings and triangular weld-on tabs

The Chassis Shop

Pro-werks Chromoly Wing Strut Kit, 4130N, Unwelded

Motion Raceworks

Motion Raceworks

Motion Raceworks

4.9

(26K)

Fragola -10 AN Black Nylon Race Hose (By The Foot) 840010-Fragola-Motion Raceworks

Fragola -10 AN Black Nylon Race Hose (By The Foot) 840010-Fragola-Motion Raceworks

Fragola -8 AN Black Nylon Race Hose (By The Foot) 840008-Fragola-Motion Raceworks

Motion Raceworks Momentary Small Push Button w/6' Wound Cord (Red or Green)-Motion Raceworks-Motion Raceworks

Motion Raceworks 48" Throttle Cable w/ GM/Ford Pedal Attachment 18-141-Motion Raceworks-Motion Raceworks

Pro-Werks 4130N chromoly motor mount bracket with 1-3/4 inch center hole and two smaller mounting holes, 3/16 inch thick

42% off

The Chassis Shop

Pro-werks 3/16 Inch Thick, 1-3/4 Inch Hole, 4130N Chromoly Mount Weld Bracket For Tandem Master Cylinder

(1)

QS Components, Inc.

5/8 x 5/8-18 Chromoly 4 Link Kit With 5/8 Steel Cone Spacers, Weld-In Bungs .120 & Jam Nuts

Pro-Werks 4130N chromoly three bar front end kit: six 3/4 inch tubes, six mounting tab sets with bushings and bolts, and two bosses

The Chassis Shop

Pro-werks Chromoly Three Bar Front End Kit, 4130N

(1)

Moore Race Chassis

MRC Seat Back Brace

(2)

Enemies Racing Australia

1/2" x 1/2" Chromoly Rod End

4Krawl Products

Kit Rotule Chromoly 1.25" - 4Krawl Products

VMS Motorsports

1/4" X Series Heavy Duty 4130 Chromoly Heim Joint / Rod End

CJ Race Cars

Chromoly Steering Column Extension

AVID Racing chromoly uniball cup

20% off

AVID Racing

4130 Chromoly Uniball Cup for 1" WPB16 Bearing | AVID Racing

QS Components, Inc.

3/4 x 3/4-16 Chromoly 4 Link Kit With 3/4 To 1/2 High Misalignment Spacers & Jam Nuts

20% off

AVID Racing

Chromoly Weld-In Square Bung, 1.0"x1.0", 3/4-16 RH | AVID Racing

Moore Race Chassis

4.9

(365)

Exclusive offer available

Mark Williams Driveline

Fixed Height Rear 4130 Chromoly 4-Link Bracket

Three black Pro-Werks 4130N chromoly floating saddle mounts in ascending tube sizes, each with a TIG-welded tab and single bolt hole

The Chassis Shop

Pro-werks 4130N Chromoly Floating Saddle Mount

(1)

Sync Industries

BRAKE ROD CHROMOLY POWERCOATED BLACK [4130 STEEL]

Pro-Werks pair of 4130N chromoly pedal mount weld gussets, each a flat dark plate with a row of nine mounting holes

20% off

The Chassis Shop

Pro-werks 4130N Chromoly Pedal Mount Weld Brackets, Pair

Pro-Werks 4130N chromoly front axles, three shown: two with dropped center sections and one straight, each with welded end bosses

The Chassis Shop

Pro-werks 4130N Chromoly Front Axle

Pair of Pro-Werks 4130N chromoly side-mount master cylinder weld brackets with triangular cutouts, designed as weld gussets, 1/8 inch thick, each with two bolt holes and a tube notch

20% off

The Chassis Shop

Pro-werks 1/8 Inch Thick, Fits 1 Inch Diameter Tube, 4130N Chromoly Master Cylinder Weld Brackets, Side Mount, Pair

Exclusive offer available

Mark Williams Driveline

GM Large 10/12 Bolt Car / Truck 4130 Chromoly Housing Ends 3.150" Bearing (Pair)

Exclusive offer available

Mark Williams Driveline

Dragster 1/8" 4130 Chromoly Front 4 Link Bracket

QS Components, Inc.

3/8 x 3/8-24 Chromoly 4 Link Kit With 3/8 Aluminum Cone Spacers, Weld-In Bungs .058 & Jam Nuts

Outlaw Race Engines

LS Chromoly Pushrod 7.400

Mark Williams Driveline

Mark Williams Driveline

4.9

(645)

TMR Customs USA

Chromoly Rod End (Heim Joint) 3/4"-16 Thread, 3/4" Hole

1.5 tube clamp 120 wall on a white background

Wide Open Design

Chromoly Interlocking Tube Disconnect – 1.5" OD x .120 Wall

S1Built, LLC.

3/4" Chromoly Rod End Heim Joint

Dimensioned drawing of a 4130N chromoly tube bend, with 90° marked by arrows spanning the vertical and horizontal ends

The Chassis Shop

Right Angle 4130N Chromoly Bend

Hammer Concepts and Designs

Hammer Concepts and Designs

4.9

(354)

Exclusive offer available

Mark Williams Driveline

Adjustable 1/4" Chromoly Modular 4 link bracket

Drift HQ

FDF Raceshop - Chromoly Heim Joint

Promaz Automotive

ENGINE BRACE - UNIVERSAL

Pro-Werks 4130N chromoly steel master cylinder weld bracket, flat plate with curved side edges and two mounting holes, angled view

20% off

The Chassis Shop

Pro-werks 3/16 Inch Thick, 4130N Chromoly Master Cylinder Weld Bracket, Side Mount

(1)

Exclusive offer available

Mark Williams Driveline

Fixed Height Modular Rear Chromoly 4-Link Bracket Kit (set of 4)

Sync Industries

TIE ROD CHROMOLY [4130 STEEL]

Triple X 4130 Chromoly 1-1/8" Drag Link - 49" - Black Powdercoated

Pit Stop USA

Triple X 4130 Chromoly 1-1/8" Drag Link - 49" - Black Powdercoated

TMR Customs USA

Chromoly Rod End (Heim Joint) 1-1/4"-12 Thread, 1" Hole

10% off

D&D Paddy Tires & Wheels

1.5" x 1" Chromoly Heim Joint (NO misalignment Spacers)

(1)

QS Components, Inc.

5/8 x 3/4-16 Chromoly 4 Link Kit With Weld-In Bungs .095 & Jam Nuts

Frankenstein Engine Dynamics

FED Hardened Chromoly Pushrod w/ oil holes (SET of 16)

HPS Performance

HPS Performance

4.9

(1.5K)

HPS Black High Temperature Silicone Vacuum Hose Tubing 1/4" 5/16" 3/8" 1/2" 5/32" 3.5mm 4mm

HPS Black High Temperature Silicone Vacuum Hose Tubing 1/4" 5/16" 3/8" 1/2" 5/32" 3.5mm 4mm

HPS 100% Stainless Steel T-Bolt Clamp for Silicone, Rubber, Turbo, Air Intake and Coolant Hose

HPS Performance 304 Stainless Steel Constant Tension Hose Clamp

HPS 100% 304 Stainless Steel Embossed Hose Clamp automotive marine heater hose coolant

20% off

AVID Racing

4130 Chromoly Uniball Cup for 7/8" WPB14 Bearing | AVID Racing

Four pre-bent 4130N chromoly tubing pieces from a Pro-Werks 6-point cage kit, two U-shaped hoops and two right-angle bends

The Chassis Shop

Pro-werks 6 Point Pre-Bent Chromoly Cage Kit, 4130N

Stiletto rack-and-pinion weld gusset in 4130N chromoly, flat trapezoidal plate with two 3/8 inch holes and a U-shaped cutout, shown from two angles

20% off

The Chassis Shop

1/8 Inch Thick, 3/8 Inch Holes, 4130N Chromoly Rack-n-Pinion Weld Bracket, Stiletto

Sync Industries

BRAKE ROD CHROMOLY KIT POWERCOATED BLACK [4130 STEEL]

QS Components, Inc.

1/2 x 5/8-18 Chromoly 4 Link Kit With 1/2 Steel Cone Spacers, Weld-In Bungs .120 & Jam Nuts

Billet Pro Shop chromoly quick removal flange for chassis and body panels

Billet Pro Shop

BPS Chromoly Quick Removal Flange

Radial Dynamics

5

(82)

4Krawl Products

Kit Rotule Chromoly 3/4" - 4Krawl Products

SHIFT Performance Labs - Chromoly Fully Adjustable Radius Rods - 2024+ Polaris XP1000 with 3/4" Rod Ends - UTVRaceShop.Com

UTVRaceShop.Com

Chromoly Fully Adjustable Radius Rods - 2024+ Polaris XP1000 with 3/4" Rod Ends

Regular heim joint

FDFRaceshop

Chromoly Heim Joint

(1)

QS Components, Inc.

1/2 x 3/4-16 Chromoly 4 Link Kit With Weld-In Bungs .095 & Jam Nuts

Toxic Fabrication

RC Colorado Chassis bracing - Dual Cab

VMS Motorsports

1/2" X Series Heavy Duty 4130 Chromoly Heim Joint / Rod End

(2)

50 Caliber Racing

Chromoly Heim Joints 1/2" - 7/8" LHT MALE

1-1/4 chromoly four link rod end kit parts on a white background

Wide Open Design

WOD Chromoly Four-Link Rod End Kit – 1-1/4"-12 Shank, 1" Bore

Mike Thomas Fab

Foxbody hatch 10 point chromoly cage kit

Pro-Werks pre-bent 4130N chromoly back bar, 1-1/8 in. x 0.083 tube with a single 80-degree bend, shown side-on against white

The Chassis Shop

Pro-werks Pre-Bent Chromoly Back Bar, 4130N

Pro-Werks 1/8 inch thick 4130N chromoly master cylinder mount weld gusset, flat wedge-shaped plate with large central bore and two smaller mounting holes

20% off

The Chassis Shop

Pro-werks 1/8 Inch Thick, 4130N Chromoly Master Cylinder Mount Weld Bracket

Poly Suspension Joint

Barnes 4WD

Forged Chromoly Poly Joint 2 5/8" MW 5/8" BH 1 1/4"-12 RH

(2)

35% off

Moore Race Chassis

.375 Tab -Chromoly

Poly Suspension Joint

HighLift Off-Road

BARNES 4WD Forged Chromoly Poly Joint 2 5/8" MW, 9/16" BH, 1 1/4"-12 RH | P/N B4WK1126

VMS Motorsports

5/16" B-Series 4130 Chromoly Steel Male Heim Joint / Rod End

TMR Customs USA

Chromoly Rod End (Heim Joint) 7/8"-14 Thread, 3/4" Hole

TMR Customs USA

Chromoly Rod End (Heim Joint) 7/8"-14 Thread, 7/8" Hole

VMS Motorsports

3/8" B-Series 4130 Chromoly Steel Heim Joint / Rod End

Billet Automotive Buttons

4.9

(220)

Power window switches billet automotive buttons custom laser etched backlit

RaceFab Solutions

3/4"-5/8" CHROMOLY THREADED ADJUSTER 1.25" THREAD

(1)

RaceFab Solutions

3/4" CHROMOLY SPHERICAL CUP & CIRCLIP

5% off

JM Auto Racing

Active Autowerke M340i/M440i Chassis Brace - G2X Brace (11-129)

Pro-Werks 4130N chromoly weld-in tube adapter with tapered body and internally threaded bore, for 1" OD x .058" wall tube (0.884" ID)

The Chassis Shop

Pro-werks 1” OD X .058” (0.884" ID) Tube Size, Chromoly Steel 4130N Round Tube Adapter

Pro-Werks threaded weld-in tube end with tapered shoulder and plain shank, bare metal, overlay text reading 3/8" OD x .058 wall (0.259" ID)

The Chassis Shop

Pro-werks 3/8" OD X .058” (0.259" ID) Tube Size, Chromoly Steel 4130N Round Tube Adapter