Murrays Sports FCS Fin Removal tool - Shop

You might also like

Wave Bridle 1/8" Black
Murrays Part# 002-0814-02
One black bridle for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® 39822011.

Murrays Sports

WAVE BRIDLE 1/8" BLACK WIRE

N5.2 Shroud 5/32" Roller Swaged

Murrays Part# 002-4205-12 

Single black shroud for Nacra 5.2 is hydraulically swaged to be clean and strong. Constructed to factory specifications.

Compare to Nacra product #9536

Murrays Sports

N-5.2 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

Murrays Sports

RONSTAN WAVE MAINSHEET BASE BLOCK

Telescoping Paddle 20" to 45"

Murrays Part# 001-1303

Compact paddle power made tough for years of hard use. The paddle has a T-Grip handle and extends from 20" to 45". The bright orange blade doubles as a signaling device. Paddles are required by law in many states for small boats and personal watercraft. Hobie Cat® uses item #3091 for this paddle.

Murrays Sports

TELESCOPING PADDLE 20" TO 45"

Getaway Spreader Pole End Cap
Murrays Part# 50-37500031
Hobie® factory replacement end cap for Getaway spreader pole
Hobie Part# 37500031

Murrays Sports

GETAWAY SPREADER POLE END CAP

Sail Pocket Protector Kit Jib

Murrays Part# 001-1002

The Jib Sail Pocket Protector Kit includes one pair of tough nylon protectors with indentations for included rivets that are set with a hammer.

Murrays Sports

JIB SAIL POCKET PROTECTOR KIT

H18 1-Piece Bias Cut Trampoline-Black

Murrays Part# 30-3103-2

This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials.

Murrays Sports

H-14 1-PIECE BIAS CUT TURBO TRAMPOLINE-BLACK

The Hobie 16 main halyard comptip is used to raise the main sail on a Hobie 16 with a comptip on the mast. The main halyard comptip features a long rope section connected to a shorter wire section with a stopper and halyard shackle with a captured pin. The shackle connects to the head of the main sail and the stopper hooks into the main halyard hook and holds the sail up.

Comptip masts are stock on all Hobie 16s since 1986. A comptip is the 10' fiberglass upper mast section of the mast 20617001

Murrays Sports

H-16 MAIN HALYARD COMPTIP

1/2 BALL (NYLON) - Hobie half round washer spacer tiller connector - Hobie part number 11510000 HOBIE HALF SPHERE TILLER CONNECTOR

Murrays Sports

NYLON 1/2" BALL

EZ LOC UP-LOCK PIN KIT

Murrays PN 50-50314001

The EZ LOC UP-LOCK PIN KIT is the pin for locking Hobie Cat EZ Loc rudder system in up position during storage. EZ Loc up-lock pin kit is the pin, screw, split rings and lanyard for securing the EZ Loc rudder in the up position.

Hobie Part Number 50314001

Murrays Sports

HOBIE EZ LOC UP LOCK PIN KIT

F4 Foils

4.9

(29)

Hobie 16 mast bearings. Teflon mast chips, Hobie part number 11110005

Murrays Sports

H-14/16 MAST BEARING (3-PKG)

(1)

Getaway Forward Trampoline Lacing Rod- 68"

Murrays Part# 50-37880001

Trampoline lacing rod for the front of the Hobie Getaway trampoline.

Hobie Part# 37880001

Murrays Sports

GETAWAY FORWARD TRAMPOLINE LACING ROD 68"

Hobie 20-style factory tiller connector post. Part of the Hobie 1953 tiller connection system. Hobie part number 40530000 and 40530001

Murrays Sports

H-20 TILLER CONNECTOR POST

Tiger Double Trapeze (4 handles)

The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection.
Order shock cord, harness loops and adjustment kits separately.

A complete trapeze system requires the following:
Harness loop - Can't Miss Ring or Dogbone
Trap Shock Cord
Trap Adjustment kit
Sailing Harness

Trapeze adjustment kits (#001-1121, 001-1130 or 001-1140, purchased

Murrays Sports

N-570 DOUBLE TRAPEZE BLACK WIRE (4)

Replacement up-loc pin for Hobie EZ LOC rudders. Add the plastic Hobie lanyard, or just use some batten tie line to secure it to the EZ LOC rudder housing. Used on both the Hobie Wave and Hobie Getaway.
Compare to Hobie part 50314001

Murrays Sports

EZ LOC UP-LOCK PIN

Mast Ball H20/21/Getaway

Hobie part number 30110001

Hobie factory replacement mast ball for Hobie 20, Hobie 21 and Hobie Getaway. Ball measures 1-1/2" diameter with a 5/8" hole.

Murrays Sports

H-20/21/GETAWAY MAST BALL

(1)

The Murrays Prindle Trapeze Wires are a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately.

Murrays Sports

PRINDLE 16 TRAPEZE WIRES (2)

Universal Pigtail-Red

Murrays Part# 54-4408-13

The Universal Kite Pigtail is an 6" pigtail with a knot and a knot/loop. The universal pigtail can be used with any kite on any knot/loop combination. They can be used as a knot and loop combination, a loop and loop combination, and you can add a second knot to make a knot and knot combination. The Universal Pigtails can be used to replace your current kiteboarding pigtail set or just a part of it. Typically pigtails are used in sets of 8 with 4 o

Murrays Sports

UNIVERSAL PIGTAIL-RED

Murrays Sports

HARKEN 38MM LOW-PROFILE STANDARD EYE STRAP

Sailsport Marine

5

(23)

FSE Robline Orion

FSE Robline Orion

FSE Robline 8 Plait

FSE Robline Dinghy Sheet XL

FSE Robline Ocean 3000

Ronstan Swiveling Cleat Unit, 28mm Ball Bearing Sheaves

Murrays Part# 21-0005

Swivel cleat bases permit easy cleating and releasing from any angle. Sheave can be relocated to allow the control line to feed from below. Fiber-reinforced nylon body. Comes complete with a 28mm (1-1/4") ball bearing sheave, small T-Cleat and the Fast Track fairlead.

Typically fitted to dinghy and catamaran spars for halyard, cunningham or outhaul control.

Murrays Sports

RONSTAN SWIVELING CLEAT UNIT, 28MM BALL BEARING SHEAVES

H18SX Bridle 5/32" Black Wire

Murrays Part# 002-0615-22

Single black bridle for Hobie® 18SX is constructed of 5/32" wire to factory specifications.

Compare to Hobie Cat® Part# 60822001 Black or 60820001 White

Murrays Sports

H-18SX BRIDLE 5/32" BLACK WIRE

Murrays Sports

MURRAYS RACE HALF HARNESS-NO SPREADER BAR

The Murrays Hobie 16 Jib Halyard Tension Kit allows sailors to quickly and easily adjust their jib halyard tension while under way.  This allows sailors to adjust their mask rake and rig tension to suit the conditions.

Murrays Sports

H-16 JIB HALYARD TENSION KIT

Trapeze Ring With Adjuster Block
Murrays Part# 21-0017
FEATURES Oversize 6mm (7/32″) diameter stainless steel rod loop

20mm (3/4″) ball bearing block for 2:1 system

Block accepts up to 6mm (1/4″) diam. line

MATERIALS

Grade 316 stainless steel loop and ball bearings

Acetal sheave

Nylon black cheeks
Weight
84g
Ronstan Part # RF17

Murrays Sports

RONSTAN TRAPEZE RING WITH ADJUSTER BLOCK

Mast Cleat
Murrays Part# 011-6481
The Mast Cleat is a can be used as a downhaul / halyard cleat on a Hobie 14 and or 16. Compare to Hobie Cat® factory item #10730000.
31mm Center to Center.

Murrays Sports

MAST CLEAT

Murrays Sports

HOBIE WAVE SUREFOOT EVA KIT P&S - GREY

Murrays Sports

RING SS WELDED 3/16"x 1" ID

Getaway Shroud 5/32" Black Wire

Murrays Part# 002-0905-02

Single black shroud (sidestay) for Hobie® Getaway is constructed to factory specifications.

Compare to Hobie Cat® Part# 37790001

Murrays Sports

GETAWAY SHROUD 5/32" BLACK WIRE

(1)

saltcitysailing

5

(16)

Ronstan Fairlead for Medium Cam Cleats

Murrays Part# 21-5015

Ronstan's front-mounted fairlead is easily fitted to the T-Cleat and C-Cleat. It allows precise cleating and release from any lead angle. Lower entry efforts for off-center cleating. Will not catch lines or clothing. Constructed of tough, abrasion resistant composite material. Weight: .5 oz.

Murrays Sports

RONSTAN FAIRLEAD FOR MEDIUM CAM CLEATS

H18 Trampoline Aft Lacing Strip-White

Murrays Part# 50-63780000

Hobie® factory replacement white vinyl aft lacing strip only for Hobie® 18.

Murrays Sports

H-18 TRAMPOLINE AFT LACING STRIP-WHITE

Murrays Sports

PROPELLER GUARD FOR TORQEEDO CRUISE MOTORS

Murrays Sports

SLINGSHOT 1-PUMP TUBES AND CLIPS

Murrays Sports

PRINDLE 18.2 SHROUD 5/32' BLACK WIRE ROLER SWAGED

3M Perfect It Compound Md

Murrays Sports

3M PERFECT-IT COMPOUND (MEDIUM)

Ronstan Medium "C-Cleat" Cam

Murrays Part# 21-5010

Lightweight and durable with quick response and easy entry/exit effort. Outstanding grip, corrosion resistant (no aluminum cams). Fast Track Fairlead option permits widest range of cleating angles without need for rotation. Saves complexity, weight and cost for barberhauler control cleats. 1/8" to 1/2" line; SWL 400 lbs.

Murrays Sports

RONSTAN MEDIUM "C-CLEAT" CAM

Cat Righter Uphaul: Cam-Clt 4:1

Murrays Part# 001-3273

This is the 4:1 block and tackle system only from Murrays' popular Cat Righting Big Bag System (#01-3280). Use with a righting bag to aid in righting a capsized catamaran.

Murrays Sports

CAT RIGHTER UPHAUL: CAM-CLEAT 4:1

Getaway Main Halyard

Murrays Part# 002-0973-60

The Murrays Hobie Getaway main halyard for is constructed to the current factory specs. It has a long rope section and a shorter wire section with a stopper and halyard shackle. The rope section is easy on the hands and prevents electrical current from traveling down the mast in the event of an electrical wire contact.
Compare to Hobie part number 37651001

Murrays Sports

GETAWAY MAIN HALYARD

P19 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-2405-12

Single black shroud (sidestay) for Prindle 19 is hydraulically swaged for a cleaner, stronger shroud. Constructed to factory specifications.

Murrays Sports

PRINDLE 19 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

Mast Step Hinge

Murrays Part# 56-6815

Designed and built to meet or exceed original OEM. 

Mast step hinge for all Prindles. Use two #56-F128 mast step hinge pins.

Nacra Sailing factory item# 30455

Murrays Sports

PRINDLE MAST STEP HINGE

Prindle split rings and clevis pin kit, mast hinge pin

Murrays Sports

PRINDLE PINS & RINGS KIT

H18 1-Piece Bias Cut Trampoline-Black

Murrays Part# 30-3103-2

This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials.

Murrays Sports

H-18 1PC BIAS CUT TRAMPOLINE-BLACK

Murrays Sports

STOP SLEEVE 1/8"

Murrays Sports

SUP PADDLE GUARD KIT

Harken Standard Flairlead
Fiber-reinforced plastic flairlead mounts on Harken aluminum or Carbo Cam cleat to allow the cleat to be used when lines enter or leave the cam at unfair angles.
Length (in) 2 3/16 in
Length (mm) 56 mm
Width (mm) 21 mm
Width (in) 1 3/16 in
Weight (g) 7 g
Weight (oz) 0.25 oz
Fastener spacing (mm) 38 mm
Fastener spacing (in) 1 1/2 in
Height above cam (in) 5/8 in
Height above cam (mm) 16 mm
Fits cam 365
Harken Part# 425

Murrays Sports

HARKEN STANDARD FLAIRLEAD

Backyard golf training

Backyard golf training

Practice nets, hitting mats, and putting mats.

Wave Club Traveler Kit

Murrays Part# 50-39250000

The Hobie Wave Main Traveler Kit is the Hobie factory main traveler kit for Club Wave includes track, Ronstan cleat, traveler car, mounting plate and rivets.

Murrays Sports

WAVE CLUB TRAVELER KIT

O-Ring Seal (Center Screw)
Murrays Part# 005-0761-02
REBUILDING OXEN BLOCKS
Murrays is a complete repair facility for Oxen (aka IFL, Ochsen, Ocean) blocks. Just send us your block and we will rebuild it for an average cost of $60.00 plus parts and shipping. Some individuals have had success repairing their own blocks, but we have had many blocks sent to us in pieces when others have failed.

Murrays Sports

OXEN BLOCK O-RING SEAL(CENTER SCREW)

Tracker Sheave Spacer

Murrays Part# 007-1052

The standard replacement sheave spacer for the traveler on all Hobie® 14, 16 and newer 17's.

Sold Individually

Hobie Cat® Part# 11860000.

Murrays Sports

TRACKER SHEAVE SPACER (EA)

O’Pen Skiff Mainsheet Ratchet Block

The O’PEN SKIFF MAINSHEET RATCHET BLOCK is the OEM replacement block for the O’Pen Skiff. Formerly known as the  O’Pen Bic.

O’Pen Skiff part # 31331.

Murrays Sports

O'PEN SKIFF MAINSHEET RATCHET BLOCK

Upper Rudder Roller

Murrays Part# 56-4009

This plastic spacer/ roller is used in the locking mechanism of Prindle Rudder systems. It is also used as a boom roller.

Murrays Sports

PRINDLE UPPER RUDDER ROLLER

Murrays Sports

RONSTAN SMALL "C-CLEAT' CAM, GREY

Half Round Load Spreader

Murrays Part# 56-4019

This component is installed into the head of the rudder blade to anchor the rudder locking pin. The Prindle Half Round Load Spreader is for rudder system on all Prindles.

Prindle Part# 4019

Nacra sailing factory item# 30973

Murrays Sports

PRINDLE HALF ROUND LOAD SPREADER

Rope Lock (Nylon)

Murrays Part# 001-0120

Easy-to-adjust black rope lock commonly used for trapeze height adjustment. Standard rope stop on Hobie®, Nacra and Prindle. Double-up back-to-back for extra strength. Hobie part number 61530000 for this rope lock.

Works on 3/16 to 1/4" line

Murrays Sports

NYLON ROPE LOCK

Murrays Sports

SPLIT CABLE COVER 5/32"

Catamaran Universal Righting System

Murrays Part# 001-8292

The Universal Righting System is simple and effective with large, 1/2" diameter, black polypropylene righting line that is light and easy to access and grip, even when wet. The line self-returns under the tramp after use. There are no knots to pre-tie or untie. The shock cord and pulleys provided hold line snug and are external, so they are easy to adjust and service. Fits 8' to 8'6" wide catamarans; ideal for boats with flush-deck trampoline.

Murrays Sports

UNIVERSAL RIGHTING SYSTEM

Jib Track End Stop

Murrays Part# 56-1911

1 Jib track end stop. Fits Nacra 5.5SL, 5.7, 5.8, 6.0, as well as Prindle 18-2 and 19.

Murrays Sports

PRINDLE/NACRA JIB TRACK END STOP

Hobie Sol Cat 18 Trapeze Wires
(2 Handles)

Trapeze Wire set for single trapeze.

Use this page to order product numbers:

002-6253-01
002-6253-02

Murrays Sports

SOL-18 TRAPEZE WIRES (2)

Hobie EZ Lock Rudder retainer clip

Murrays Part# 50-90880231

Retainer clip for Hobie Bravo EZ Loc Rudder Housing.

Hobie Part# 90880231

Murrays Sports

HOBIE EZ LOCK RUDDER CLIP

Harken Cleat Adapter with Hardware

Murrays Part# 007-50010

Hobie Factory Part 50010

Murrays Sports

CLEAT ADAPTER PLATE WITH HARDWARE

The super comfortable, compact design of the Rooster Diamond Overhead Buoyancy Vest features a high cut waist to allow unrestricted movement and easy access to a trapeze hook. The highly adjustable shoulder and waist straps ensures a great fit for different body shapes, while the recessed, neoprene-covered buckles removes the risk of snagging on ropes and rigging. Strong, rip-stop fabric ensures longevity and provides greater wear resistance with reflective panels for improved visibility. The front pocket i

Murrays Sports

ROOSTER DIAMOND BUOYANCY VEST

Trampoline H20 Mesh 1-Piece-Black
Murrays Part# 30-3106Y
This aftermarket, one-piece, bias-cut, black mesh tramp for Hobie® 20 is not Hobie® Class-legal for racing. The tramp includes hiking straps, trapeze grommets, 16" by 24" Velcro pocket and webbing loops.

Murrays Sports

H-20 1 PIECE TRAMPOLINE-BLACK

Ronstan Eye & Eye Swivel

Murrays Part# 21-0078

This ball bearing swivel by Ronstan has lower friction and higher working loads than non-ball bearing versions. It is used in conjunction with blocks and rigging systems to provide articulation and rotation. Not suitable for high-speed rotating applications.

Murrays Sports

RONSTAN ROLLER FURLING SWIVEL (EYE/EYE)

EZ-UP TRAP KIT: HARKEN - similar to Hobie part number 3102

Murrays Sports

EZ-UP TRAPEZE KIT

Getaway Trapeze Wire (2 Handles)
Murrays Part# 002-0953-02
The Murrays Getaway Trapeze is a set of 2 black or white coated trap wires with 2 handles for trapezing. Order shock cord, harness loops and adjustment kits separately.

Murrays Sports

GETAWAY TRAPEZE BLACK WIRE (2)

(1)

Rock climbing essentials

Rock climbing essentials

Shoes, apparel, and chalk systems.

Hobie 16 Aussie Jib Halyard Kit with Pigtail Murrays Part# 001-3302
Reduce mast compression by 66%! The Aussie Jib Halyard Kit for the Hobie® 16 allows easier tacking, better mast rotation and consistent mast bend! Use with existing lower forestay. The "fail-safe" pigtail keeps block failure from resulting in de-masting. A similar system is stock on new Hobie 16's. Complete kit includes everything you need: hardware with all Harken blocks, 70' of prestretched line, zippered pouch and instructions. 80660000

Murrays Sports

H-16 AUSSIE JIB HALYARD KIT WITH PIGTAIL

H20 Bridle 5/32" Black Wire

Murrays Part# 002-0715-22

One bridle for Hobie® 20 is constructed to factory specifications. 

Compare to Hobie Cat® Part# 40822001

Murrays Sports

H-20 BRIDLE 5/32" BLACK WIRE

Traveler Ball Bearing H18 61852000

Murrays Part# 50-61850000

The Traveler Ball Bearing H18 is the stock Hobie 18 Main sheet traveler car ball beaing. This ball can be used in place of cylinder bearing #50-61860000 to bring the traveler back to what came stock on the Hobie 18.

The difference between the traveler ball and the cylinder is that the balls allow the car to move faster but they wear down quicker. Hobie has stopped making the Hobie 18 traveler balls, but Murrays found their source and made more!

Murrays Sports

H-18 TRAVELER BALL BEARING

Big Bag Cat Righting System

Murrays Part# 001-3280

Our Cat Righting Big Bag System is a must for solo or lightweight crews to feel confident being able to right a capsized catamaran. It is powerful enough to right bigger cats without loosening shrouds. and is easy to install with no boat modification required. The bag attaches with hook and loop straps under the tramp for easy use and storage. Class legal for racing! Theoretical maximum capacity of the 18" x 32" bag is 250 lbs. The included 4:1 block and

Murrays Sports

CAT BAG RIGHTING BIG BAG SYSTEM

(1)

Prindle 18 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-2305-12

One single black shroud (sidestay) for Prindle 18 is constructed to factory specifications. Hydraulic swaging produces a cleaner, stronger shroud.

Murrays Sports

PRINDLE 18 SHROUD 5/32" BLACK WIRE ROLLER SWAGED

Jib Traveler Control Kit:
Fixed Cam

Murrays Part# 001-3112

A jib traveler system allows remote adjustment of the jib cars. This dramatically increases downwind speed and may help avoid a pitchpole caused by your crew moving leeward to make an adjustment by hand.

Murrays Sports

JIB TRAVELER CONTROL KIT: FIXED CAM

trapeze adjustment kit - 3102 - Murrays EZ Up Trap Kit

Murrays Sports

EZ-UP TRAP KIT: NO-CUT (PR)

Hobie Wave Jib Spreader End Cap

Murrays Part# 50-38950011

This is part of the Wave bow spreader kit. These go into the ends of the spreader pole. Replacement end cap for Hobie Wave jib spreader assembly.

Sold individually
Hobie Part# 38950011

Murrays Sports

WAVE JIB SPREADER END CAP

Ronstan Ferrule Eye 8mm Clearance

Murrays Part# 21-0499

Ronstan's grade 316 grade stainless steel eyestrap has a ferrule that guides line and provides a nice lead from any angle. Weighs 0.1 oz.

Measurements:

A = 3/8" ferrule eye diameter
B = 3/16" width
C = 1-1/8" distance between holes center-to-center
D = 5/32" hole diameter

Ronstan Part# RF499

Murrays Sports

RONSTAN EYESTRAP WITH FERRULE EYE

Murrays Sports

GETAWAY AFT TRAMP LACING KIT

Hobie Sol Cat 18 Trapeze Wires
(2 Handles)

Trapeze Wire set for single trapeze.

Use this page to order product numbers:

002-6253-01
002-6253-02

Murrays Sports

DART 18 TRAPEZE BLACK WIRES (2)

GoPro Mount with Fastener for Gath Helmet

Murrays Part# 52-2303

The GoPro Camera Mount gives you the convenience of easy, clip-on/clip-off camera mounting on a Gath helmet. The kit combines the GoPro camera base plate with a Gath customized, rust-proof helmet screw for an easy, do-it-yourself, convenient, top mounting to provide a secure, well-balanced helmet cam. All model GoPro cameras easily clip on or off.

Murrays Sports

GOPRO HELMET MOUNT WITH FASTENER

Murrays Sports

SPLIT CABLE COVER 1/8"

Comp-Tip Mast Head Sheave for H16 Wave
Murrays Part# 50-20614210
CompTip Mast Head Sheave for Hobie 16 or Wave, is the sheave found at the top of the comptip assembly. Two sheaves are used in each assembly. The sheaves each ride on a, comptip sheave spacer.
The sheave is 9/16" wide x 2 1/4" diameter with 3/8" hole.
The larger sheave for the obsolete mast head for all-aluminum mast is no longer available.
Hobie Part number 20614210

Murrays Sports

H-16/WAVE COMP-TIP MAST HEAD SHEAVE

Getaway Main Lacing Rod 64-3/4"

Murrays Part# 50-37880011

This is the lacing rod that is used to tension the main trampoline on the Hobie Getaway.

Hobie Part# 37880011

Murrays Sports

GETAWAY MAIN LACING ROD 64-3/4"

O’Pen Skiff Boat Cover

Murrays Sports

MURRAYS OPEN SKIFF BOAT OCVER

Hobie trapeze shock cord 20730001 and 20730002

Murrays Sports

H-14/16 TRAPEZE SHOCK CORD

(1)

Murrays Sports

G-CAT 5.7 MAIN HALYARD

Post-workout recovery

Post-workout recovery

Wraps, compression sleeves, and foam rollers.

Trap Shock Cord H17

Murrays Part# 001-3520

A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Shock cord comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Cord is 1/4" diameter by 12'

Sold Each

Murrays Sports

H-17 TRAP SHOCK CORD